Voltage Detector and Phasing Voltmeter
81280 (300V - 25KV) 83280 (300V - 35KV)

Dual application design for use as voltage detector or phasing voltmeter

Five-position switch controls different functions:

Completely shielded to minimize stray field interference
Easy to read analog meter scale
3kV test device to verify unit and accuracy
No extension resistors required
Optional adapters available for underground use up to 35kV
Connector cable protected with clear PVC covering
Watertight construction

Voltage Detector - VDA0300 / VDAH300 (0 - 300kV)

Widest voltage range (4kV - 500kV) available in one voltage detector. Designed for use on overhead and underground systems

	Indicates approximate nominal or induced voltage in line-to-ground values
	Easy to read analog scale
	Dual linear / logarithmic scale for better resolution on 4kV systems
	Requires no voltage scale selector switch or multipliers
	Hold and backlight functions available on VDAH300
	Totally passive meter function
	Optional adapters available for underground use up to 35kV
	Watertight construction

Voltage Detector - VDA040P (0 - 40KV)

Dual application design. Detects voltage both as a proximity or direct contact meter on overhead and underground systems.

	Five-position selector switch controls different functions:
	P - Indicates voltage in proximity to line URD - Detects voltage on underground systems OH - Detects overhead voltage 0 - 10kV X4 - Detects overhead voltage 11 - 40kV T - Tests and verifies meter function
	Selector switch calibrated for height above ground to compensate for capacitive coupling effect
	Reads only contacted test point. Indicates line-to-ground values for nominal or induced voltages
	Easy to read analog scale
	Over load protected up to 66.5kV (115kV phase-to-phase)
	Completely shielded to minimize stray field interference
	Optional adapters available for underground use up to 35kV
	Watertight construction

Voltage Detector - VDA040C (0 - 40KV)

Multi-function design for voltage detection on overhead and underground systems with ability to read capacitive test points.

	Five-position selector switch controls different functions:
	P - Indicates voltage in proximity to line URD - Detects voltage on underground systems OH - Detects overhead voltage 0 - 10kV X4 - Detects overhead voltage 11 - 40kV T - Tests and verifies meter function
	Selector switch calibrated for height above ground to compensate for capacitive coupling effect
	Reads only contacted test point and indicates line-to-ground values for nominal or induced voltages
	Easy to read analog scale
	Over load protected up to 66.5kV (115kV phase-to-phase)
	Completely shielded to minimize stray field interference
	Optional adapters available for underground use up to 35kV
	Watertight construction

Digital Voltmeter - PD50 (0 - 50kV)

Designed for measuring voltage and phasing on overhead and underground systems

	Can be used on capacitive test points to detect voltage
	Completely shielded to minimize stray field interference
	Easy to read LCD digital meter
	Optional adapters available for underground use up to 35kV
	No extension resistors required
	Connector cable protected by clear PVC covering
	3kV test device included to verify unit and accuracy
	Watertight construction

RVD 50 High Line Resistive Digital Voltmeter (0 - 50kV)

Designed for reading AC voltages with an accuracy range of + or - 2%
0 - 50 KV

	Easy to read LCD digital meter
	Completely shielded to minimize stray field interference
	Connector cable protected by clear PVC covering
	No extension resistors required
	3kV test device included to verify unit and accuracy
	Optional adapters available for underground use up to 35kV
	Watertight construction

Phase Sequence Indicator

Used to determine the proper sequence on all polyphase circuits prior to connecting phase sensitive loads such as pumps or motors. They will indicate the presence of all phases as well as phase sequencing. Case is included.

CAUTION: USE RUBBER GLOVES. DO NOT LEAVE CONNECTED LONGER THAN 1 MINUTE.