Page | 1 | 2 |

Ground Rod Drivers

Cat. No. Description Length
Weight
1350 Ground Rod Driver 60" (1.52 m)
45 lbs (20.40 kg)
1350001 Ground Rod Driver 26" (0.66 m)
15 lbs (6.80 kg)

Adapters
Cat. No. Description
Weight
1350058A For 5/8" (1.6 cm) Ground Rods
1/2 lb (0.21 kg)
1350034A For 3/4" (1.9 cm) Ground Rods
1/2 lb (0.21 kg)

Bags
Cat. No. Description
Weight
B1350 Bag for 1350
1 lb (0.45 kg)
C30 Bag for 1350001
1 lb (0.45 kg)

60" (1.52 m) long and drives 5/8" (1.6 cm) ground rods deep by concentrating impact directly to the rod.

Light-weight and easy-to-use. Drives 1/2" (1.3
cm) ground rods with less effort than conventional methods. Discs surrounding the handle protect hands from walls, shrubbery, and the sliding parts. Measures 26" (66 cm) long with a 14" (35.6 cm) stroke.

Adapters for 5/8" (1.6 cm) and 3/4" (1.9 cm) ground rods are available. Bag not included.

Ground Rod Drivers



Framing Jack

Cat. No. Description
Weight
640001 Framing Jack with Ratchet Wrench
58 lbs (26.38 kg)
6400B Ratchet Wrench Only
1 lb (0.45 kg)

Designed to lift the largest poles with ease and safety. The framing jack slips under a pole lying flat on the ground and raises it without danger of it toppling over. Measures 15" (38.1 cm) long.

SWL at 2:1 - 3,000 lbs (1357 kg)

Top of Page

Framing Jack



Shear Plate Dapping Tool

Complete Sets
Cat. No. Description
Size(s)
6100012B With 2 Brace Drive Pilots
11/16" (1.8 cm) and
13/16" (2.1 cm)
6100012M With 2 Impact Drive Pilots
11/16" (1.8 cm) and
13/16" (2.1 cm)
610001B With 1 Brace Drive Pilot
11/16" (1.8 cm)
610001M With 1 Impact Drive Pilot
11/16" (1.8 cm)
610002B With 1 Brace Drive Pilot
13/16" (2.1 cm)
610002M With 1 Impact Drive Pilot
13/16" (2.1 cm)
Weight - 11/2 lbs (0.68 kg)

Pilots
Cat. No. Description
Weight
610001B2 Pilot Only Brace Drive
11/16" (1.8 cm)
610001M2 Pilot Only Impact Drive
11/16" (1.8 cm)
610002B2 Pilot Only Brace Drive
13/16" (2.1 cm)
610002M2 Pilot Only Impact Drive
13/16" (2.1 cm)
Weight - 8 oz (224 g)

Top of Page

Shear Plate Dapping Tool

Designed to cut a recess for the installation of the shear plates. Complete sets come with 1 bit, 1 or 2 pilot(s) and 1 Allen wrench. Cutter heads are designed to accommodate pilot drives for both 5/8" (1.6 cm) and 3/4" (1.9 cm) bolts, and are held in place with an Allen head screw. Pilot drives can be ordered with shanks designed for either impact (M) or hand brace (B) use.

Other Parts
Cat. No. Description
610001AW Allen Wrench for Dapping Tool
610001B1 Bit Only for Dapping Tool
610001SS Set Screw, 1/2"-13 (1.3 cm-13)


Flag Insertion Tool

Cat. No. Description
Weight
MFP10027 Regular Point
2 lbs (0.91 kg)
MFP10027PS Regular and Spade Point
2 lbs (0.91 kg)

Replacement Parts
Cat. No. Description
Weight
MFP10027P1 Point Only
1 oz (28 g)
MFP10027PQ Point with Quick Change
6 oz (168 g)
MFP10027SP1 Spade Point Only
2 oz (56 g)
MFP10027SPQ Spade Point with Quick Change
7 oz (196 g)

Replaces the metal probes used to make holes in hard ground for marking flags. Has no metal parts between the point and the handle so the user is protected against an accidental contact with buried electrical cable. Fiberglass has been tested at 100 kV per foot for five minutes.

Top of Page

Flag Insertion Tool



Hydraulic Pole PikeHydraulic Pole Pike

Cat. No.
HP3

Allows pole setting and strengthening to be done more easily.

SWL
Pike High Point
Pike Low Point
Hydraulic Lift
Base
Weight
3,000 lbs
6'10"
5'4"
18"
6" x 6"
28 lbs
1,361 kg
2.08 m
1.62 m
0.45 m
15.2 x 15.2 cm
12.67 kg

Page | 1 | 2 |