Salisbury Home

Safety Line Products

 
 
 
 
 
 
 
 

 
 

   
Pages | 1 | 2 | 3 | 4 |

RIV Tools & Accessories

CLEVIS TYPE RIV SHUNTS
Cat. No.
Weight
8504
1 oz (28 g)

Used on 5/8" (1.6 cm) diameter clevis pins to suppress radio and TV interference. Can also be used for installations on the clevis pin of clevis insulators, bolted and automatic dead ends, suspension and angle clamps, and extension links. The design incorporates spring type serrations on both sides to penetrate corrosion or contamination build up on side wall metals. Installs easily with live line shunt applicator.

 
BALL AND SOCKET TYPE RIV SHUNTS
Cat. No. Description
Weight
8505B Bonding Brush, Cap and Pin Type
1 oz (28 g)

Used to shunt ball and socket type insulators. The brush is installed with the brass cotter key in place.

 

 ball socket type RIV shunts
SHUNT APPLICATOR
Cat. No. Description
Weight
8505Q Quick Change with Hammer
1 1/2 lbs (0.68 kg)
8505U Universal with Hammer
1 1/2 lbs (0.68 kg)

Used to install both clevis pin caps and pin type shunts. The ball clamp allows tool to be used at any angle for installation. The hammer action allows the shunt to be started and then “hammered in.”

 

 shunt applicator
GREASE POT WITH BRUSH
Cat. No. Description
Weight
GP1001 Pot with Brush
2 lbs (0.91 kg)
GP1021618 Brush Only
5 ozs (0.14 kg)

Container and applicator for connector grease.

grease pot with brush

Penta Socket

Cat. No. Description
Weight
590001S 3/4" (19 mm) Pentahead Socket Only
1 lb (0.45 kg)
590001 “T” Wrench with 3/4" (19 mm) Pentahead Socket
1 lb (0.45 kg)
590002 Speed Wrench with 3/4" (19 Mm) Pentahead Socket
2 lbs (0.91 kg)
59P34916SD Penta Wrench, 3/4" (11 mm), 9/16" (14 mm), and Screw Driver
3 lbs (1.36 kg)
5900017/16T “T” Wrench with 3/4" (11 mm) Pentahead Socket and 7/16" depth
1 lb (0.45 kg)
593412PHT “T” Wrench with 3/4" (11 mm) and 1/2" (13 mm) Pentahead Sockets
1 lb (0.45 kg)

Use to tighten or loosen special 3/4" (19 mm) pentahead sockets. Comes with a “T” handle. Can be used with any 1/2" (13 mm) drive wrench.

Insulated Adjustable Wrench

Cat. No. Handle Length
Weight
1160 12" (30.5 cm)
1 lb (0.45 kg)
1161 18" (45.7 cm)
2 lbs (0.91 kg)
1162 24" (61.0 cm)
3 lbs (1.36 kg)
   
B1160 Protective Bag for 1160
1 lb (0.45 kg)
B1161 Protective Bag for 1161
1 lb (0.45 kg)
B1162 Protective Bag for 1162
1 lb (0.45 kg)

Top of Page

Insulated Adjustable Wrench

All have a spring to prevent the jaws from accidentally moving while in use. These wrenches have a 12" (30.5 cm) wrench head and are supplied with a 11/4" (3.2 cm) diameter fiberglass handle.

Insulated Ratchet Wrench

Cat. No. Handle Length
Weight
4412 12" (30.5 cm)
1 lb (0.45 kg)
4418 18" (45.7 cm)
2 lbs (0.91 kg)
B1160 Protective Bag for 4412
1 lb (0.45 kg)
B1161 Protective Bag for 4418
1 lb (0.45 kg)

Top of Page

Insulated Ratchet Wrench
Standard 1/2" (1.3 cm) square drive insulated ratchet wrench comes with a 11/2" (3.2 cm) fiberglass handle.

Insulated Ratchet Wrench for Clamp Top

Cat. No. Handle Length
Weight
44CFG 8" (20.3 cm)
2 lbs (0.91 kg)
B1161 Protective Bag
1 lb (0.45 kg)
Has an 1 1/4" (3.2 cm) diameter fiberglass handle with eye on end for use with a clamp top tool (Cat. Nos. 44CQ or 44CU).

Jacket Removal Tool

Cat. No.
Weight
1700040
1lb (0.45 kg)

Strips insulation on semi-conductors and eliminates the jerking and pulling required when using pliers.

Jacket Removal Tool

Cat. No. Description
Weight
5300 Lyndee #3
1lb (0.45 kg)

Re-threads any bolt from 1/4" to 1" (.6 to 2.5 cm).

Goat Wrench

Cat. No. Description
Weight
920 Goat Wrench
2 lbs (0.91 kg)


Made from alloy steel to withstand hard usage. The jaws are designed so that a nut, bolt or pipe is drawn further into the throat as pressure is applied.

Toggle Handle

Cat. No. Description
Handle Length
Weight
1258HEQ Quick Change
8" (20.3 cm)
1 lb (0.45 kg)

This tool is used to convert any double threaded ferrule stick to a toggle handle for torquing requirements.

Pages | 1 | 2 | 3 | 4 |